CTS SERIES
POLISHING FOR SLABS
CASSANI’S CTS SERIES is designed for polishing marble and
agglomerated cement and engineered stone tiles.
Scroll down to see our product range
and visit our YouTube page for videos of our machines in action
Tailored to your needs
Two classes of machines differing in the useful width of the conveyor belt, 70 (700mm) and 80 (830mm).
The 70 has an optional integrated sightside calibration/grinding unit in the same structure, with 3-5 fixed mechanical-pressure heads that provide vibration-free calibration before the polishing stage. For the 80, this calibration unit is a separate machine (see technical diagram).
Up to 12 pneumatic polishing heads mounted on the 70 on a monolithic and sturdy mobile bridge; up to 16 on the 80.
The width of the stroke is adjustable according to the format to be processed.
OUR RANGE OF polishing SOLUTIONS
| CTS SERIES | 70 / with Calibration | 70 Polish-Only | 80 |
|---|---|---|---|
|
Useful Belt Width (mm) |
710 |
710 |
840 |
|
Abrasive Diameter |
790 |
790 |
890 |
|
Range of Worked Product Height
(mm) |
15-60 |
15-60 |
15-60 |
|
Belt Speed (m / min) |
1-5 |
1-5 |
1-5 |
| CTS SERIES 70 / Polish-Only | Max Length (mm) | Total Connected Load (kW) | Water consumed (m3/hr) |
|---|---|---|---|
|
POLISHER 8 HEADS |
7700 |
60 |
25 |
|
POLISHER 10 HEADS |
8950 |
78 |
31 |
|
POLISHER 12 HEADS |
10200 |
96 |
37 |
| CTS SERIES 70 / with Calibration | Max Length (mm) | Total Connected Load (kW) | Water consumed (m3/hr) |
|---|---|---|---|
|
3 CALIBRATOR + 10 POLISHER
HEADS |
11950 |
147 |
40 |
|
3 CALIBRATOR + 12 POLISHER
HEADS |
12700 |
162 |
47 |
|
4 CALIBRATOR + 12 POLISHER
HEADS |
13450 |
184 |
51 |
|
5 CALIBRATOR + 12 POLISHER
HEADS |
14350 |
206 |
55 |
| CTS SERIES 80 | Max Length (mm) | Total Connected Load (kW) | Water consumed (m3/hr) |
|---|---|---|---|
|
POLISHER 12 HEADS |
11100 |
117 |
37 |
|
POLISHER 14 HEADS |
12350 |
135 |
43 |
|
POLISHER 16 HEADS |
13500 |
160 |
50 |
CTS SERIES
AVAILABLE IN TWO BELT SIZES, WITH AND WITHOUT INTEGRATED CALIBRATION
CTS 80 Polisher / 12 heads
CTS 70 with Calibration / 5 + 12, with 5 Calibrating and 12 Polishing heads
Engineered FOR EXCELLENT RESULTS
- Calibrating heads raised/lowered by electromechanical system; polishing pressure is pneumatic.
- Transversally mobile beam along which the polishing heads are arranged.
- The Frankfurt-holder plate is fixed to the spindle through an elastic joint for an excellent adaptation to the tile surface.
- Cooling water fed through an axial cavity in the spindle itself and also by a radial distribution on the diamond-tipped heads.
- Centralized, programmed automatic lubrication by pump of all concerned points.
- Belt speed is 1–6 m/min.
Robust, safe and easy to use
- Tiles held in position by stainless steel guides.
- Conveyor belt made of multi-layer PVC, sliding on replaceable anti-wear steel plates.
- Access doors are made from thick aluminium sheeting, with safety control devices that interrupt the electrical feed when they are opened.
- Each head is provided with its own control panel.
- Special device for creating a small gap between consecutive tiles when entering the machine.
Optionals
- CTS 80 machines can be preceded in a series by a smaller, 1-4 head machine to calibrate the bottom of the tiles, equalizing height to a tolerance of tenths of a millimetre.
- Quick-change abrasive mounts and abrasive supply.
